Monday, November 7, 2011

Table tutorial

The rod above the table was purchased at a store called 
ROD WORKS
They now have an online store www.rodworks.com

Okay here it is my DIY table tutorial. If you have any questions please leave a comment and I will get to you asap. If you build this table please send me pictures I would LOVE to see what you build.




        ****I missed a few boards on this list below:****
               (Front): 2 (2x6's) 47" long
               (Back): 1 (2x6) 47" long
I layed it all out and ended up cutting off the legs they were too long so i cut them down to 32 inches(as listed) You can tweek your table to any measurement you would like.
I used glue and screws to put this together it will be more secure if you use both. You don't need a ton of glue just a bead down each board, screw it together and let dry.
Here is a good pic of the whole table and what it should look like during the process.


 This is it all assembled so you can see just how it is put together

This is so you can see the top slats, I used 2.5 inch nails to screw into the base.



I am not sure how much this table would have cost because I already had the wood, but it would be easy to price out at Lowe's or Home Depot. Just take the cut list and go to the store and see how many of each board you need (just pick out the straightest ones)They will also cut the wood for you to the lengths needed. I have had better luck at Lowe's they never charge me unless I have a ton of wood to cut.
If I had to guess I would say this would cost under $100.
(pretty good deal since you can't buy a good sofa table for under that.)

 I get my Walnut gel stain at Sherwin Williams its around $17.00 for a quart
Don't be timid when applying this gel, I just dump a blop on the table and start spreading until in is the color I want.
I use foam brushes to apply my gel stain (you can get a bag of about 8 at the $ store just make sure you throw them away outside and not in a closed container or by heat)
Good luck everyone!! Happy building. 
Thanks,
Lindsay

19 comments:

  1. This is just so beautiful, I love the color and style, and the decor is beautiful too!

    ReplyDelete
  2. Do you mind if I ask how much it costs to make this? I want to try it.. I love it!! So impressive

    ReplyDelete
  3. Hey I just started making this and there were a couple of pieces missing. You didn't list the front 2 pieces which were 2x6's at 47" or the back piece which was 1 2x6 at 47". Just wanted to let you know. :)

    ReplyDelete
  4. Lyndsey- Thanks you are right I did leave those two pieces out thanks for letting me know.

    ReplyDelete
  5. OK, I have a like 100 projects on the go, but I really like this, and I think I could make it. I can put all sorts of things with yarn or fabric together, but when it comes to wood, I get timid. I need to get over that, especially since I could probably make this with what's in the garage. I'm bookmarking this blog!!!!

    ReplyDelete
  6. Love the table's chunky, rustic charm and the overall, finished ensemble with decor is perfect!

    ReplyDelete
  7. I'm adding this to my want to make list. Love the rustic old wood look. I am curious though if you would share where you found the rod mounted above the table holding your pictures. I absolutely love it.

    ReplyDelete
  8. Love this! Newest follower from house of grace!

    xo, laura@imnotatrophywife.com

    ReplyDelete
  9. That is beautiful! I love the stained wood and chunky look. I need to get a bigger house to do all of these awesome projects!=) bellesbazaar-heather.blogspot.com

    ReplyDelete
  10. OMG I just love this! So gonna have to build one or two of these for our new apartment :) We just moved and your blog is really really helping me make it homey and nice :) Thank you so much Lindsay!

    ReplyDelete
  11. OMG I just love this! So gonna have to build one or two of these for our new apartment :) We just moved and your blog is really really helping me make it homey and nice :) Thank you so much Lindsay!

    ReplyDelete
  12. Very creative, i am interested in where you purchased the rod for the photos

    ReplyDelete
    Replies
    1. I got the rod at Rod Works. They have an online store now!!!

      www.rodworks.com

      Go check it out!
      Thanks,
      Lindsay

      Delete
  13. I love this table. I'm searching for something just like this. I'm not handy...so I'm hoping my husband can make it for me. Glad I found your blog!

    ReplyDelete
  14. Love your work. Did you also make the frame holder hanging above the table? If so, can you please share how you did it!?

    ReplyDelete
  15. Love your work. Did you also make the frame holder hanging above the table? If so, can you please share how you did it!?

    ReplyDelete
    Replies
    1. Mindy,
      I purchased the rod from Rod Works in Utah. But....... they now have an online store!!!
      www.rodworks.com
      go check it out you will be SO glad you did.
      Thanks,
      Lindsay

      Delete
  16. Hi!!! love this! Did you add boards to the bottom of this table? I think in a more recent photo you added a bottom for shelving? thanks!

    ReplyDelete
  17. Thank you SO much for taking the time to share your plans and final result. We were so inspired that my husband built one for my entryway and I had to share. It is the pride and joy of my decor!!! If you scroll to the middle of this post you will see my table. http://meand4boyz.blogspot.com/2014/01/christmas-2013-decor-our-buntingbanner.html

    ReplyDelete